I have a login screen and wanted to take a screenshot. We can automate this process.

Let’s do this by following the steps below:

1.On the Component ToolBox panel, extract the following components to the Designer Surface.

   a.Click icon   Action .   

   b.From the Action category drop-down menu, drag the ActionSet component.

   c.Click Icon  Utilities.

   d.From Utilities Category drop-down menu, click Image Utilities and drag Save onto the Designer Surface.

2.Go to Designer Surface, double-click ActionSet Component.

3.An Action Setting Dialog box should appear. 

4.Open the image or screenshot you wanted to automate.

5.Go to ActionSet Setting dialog box, Click Capture Button.

6.Press “Ctrl+Shift’ key and drag the portion of image to be extracted.

7.The screenshot is appeared on ActionSet Settings as shown in the fig.


8.Right-click Image and click AddActionGroup and select GetImage to adjust the Anchor as per the image size.


9.Close the dialog box.

10.Connect the Control In/Out ports between the components right from Start to End component.

11.Connect the Data In/Out ports of GetImage of ActionSet, Image of Image utilities and MessageBox components.

12.Press F5 key to run the activity.


      The Result is displayed as :